The DT-10BR Digital Foot Pedal Tuner features an LED-type meter for rapid response, accurate detection, and fast, hands-free tuning. The 16-segment note display provides excellent visibility even on dark stages, and the rugged body is designed for years of tough use. Rapid response and accurate operation for smooth tuning The LED-type meter indicates the difference between the reference pitch and the input signal, and delivers rapid response and accurate operation for stress-free tuning. Tough body designed for onstage use The tough, solid-feeling body of the tuner is built to withstand years of onstage use and touring. Power to the pedal The included cascade cable allows you to power the DT-10BR tuner and other effects pedals from one 9-volt adapter. Connect the cable to an AC adapter with an output of 9V DC (center pin negative), then connect one plug to the DT-10BR and the others to the pedals. The cascade cable will supply power to all connected guitar pedals without the need for separate adapters. Excellent visibility even on dark stages Note names, flat settings, and calibration values are shown by a 16-segment display and high-brightness LED-type meter for excellent visibility even on dark stages. Support for seven-semitone flatted tunings The DT-10BR tuner provides a flat tuning mode that supports dropped tunings in a range from one to seven semitones. Low-pitch performance techniques are also supported. Adjustable calibration setting Calibration can be adjusted to accommodate different reference pitches, allowing you to precisely match any song or key. Dual outputs for a variety of applications The DT-10BR provides two output jacks; a bypass jack that always outputs the input signal, and a separate output jack that can be muted while tuning between songs. This gives you flexibility to meet the needs of a variety of situations.
Power Supply: One 9V battery (Included), or AC Adapter (sold separately)
Battery Life: Approximately 3 hours continuous use with tuner on (A4 input continuously), approximately 50 hours continuous use with tuner off (A4 input continuously).
Current Consumption: Maximum 43 mA
Dimensions: 4.09" (W) x 4.69" (D) x 2.01" (H)
104 (W) x 119 (D) x 51 (H) mm
Weight: 0.90 lbs. / 410 g
Korg DT-10BR Chromatic Pedal Tuner Features:
Floor-type chromatic tuner optimized for guitar and bass players
Simple and stable design with a road-ready metal case
Easy-to-read 13 point bright Red and Green LED display and note name display
16-segment note display for excellent visibility even on dark stages
Flat-tuning up to seven semi-tones. Tune down to A!
Detection range of E0 (20.60 Hz)-C8 (4186 Hz)
438 - 445 Hz calibration adjustment
Two Selectable Outputs (Bypass and Tuner out)
Output jack mutes for silent onstage tuning
Included cascade cable for powering up to two 9 volt pedals
; "Korg DT-10BR Chromatic Pedal Tuner")
