The simplest, most effective, most affordable method for powering your 9-volt effect units. Advanced circuitry steps down high line voltages to 9-volts and automatically supplies the required amount of current. 1.7 Amp current capability can power over twenty 9-volt effects. Includes Cable-5 daisy chain connector and assorted jumper cables to power phone plug, reverse polarity, battery-only, and Line 6 units.

The modular Power-All system allows for multiple effects to link to the PA-9 via the easy-to-use Cable-5 daisy chain connector. In addition, the Power-All comes equipped with four types of adapter cables for compatibility with effects pedals that don't use standard polarity tip negative/barrel positive jacks.

9-volt, 1.7 Amp supply can power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual pedals used).

Can replace any 9-volt DC power supply.

No transformer -- no heat dissipation or noise (60 cycle hum).

Takes up only one outlet socket space (unlike typical wall wart adaptors).

Can run off any mains supply (100-240v), no need for power transformers when traveling abroad.

Meets national safety regulations.


	Reverse Polarity Jumper Cord Tip positive / barrel negative, for use with older Dunlop, and some Fulltone effects.

	1/8" Phone Plug Jumper Cord Tip positive / sleeve negative, for use with Jacques, older DOD, Pro Co Rat, and some EH effects.

	Reverse Polarity Jumper Cord with larger male barrel plug, for use with Line 6 Modelers.

	Battery Plug Jumper Cord connects to unit?s battery clip, for use with older effects and new boutique units without DC jacks (older Ibanez, older MXR, Z-Vex).

* Boss, DanElectro, DOD, Dunlop, Electro-Harmonix, Fulltone, Ibanez, Line 6, MXR, Morley, Pro Co Rat, Z-Vex are registered trademarks of their respective companies and their usage implies no endorsement by or affiliation with Godlyke, Inc.